Double inlet centrifugal fans with directly coupled motor .
Compliance regulations ERP 2015.
Material : galvanized steel.
Finish: galvanized.
Fan for clean air used in air handling units, extractors afonizzati and hoods .
Air flow rates from 600 to 7700 m³/h .
Pressures from 50 Pa to 400 Pa .
230V single-phase motors with the exception of the 1100 versions of the T 12/9 and 12/12 models that are 400 V three-phase.
The air temperature must not exceed 40 ° C.
Always check the absorptions of the electric motor; over-absorption causes overheating of the same, malfunctions and / or breakages.
All engines are equipped with integrated thermal protection.
- Basic supports
- Pressing mouth flange
- Safety protection grids for suction mouths
- Electronic speed regulators.
Pa : pressure drop in Pascal
dB (A ) : noise index
T : Three-phase
3V: 3 speed motor
modello | W | Poli | dB (A) | IP | pressione Pa | |||||||
50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | |||||
portata m3/h | ||||||||||||
7/7 | 50 | 6 | 60 | IP30 | 1000 | 550 | ||||||
147 | 4 | 74 | IP55 | 1600 | 1550 | 1500 | 1400 | 1100 | 400 | |||
9/7 | 250 3V | 6 | 65 | IP20 | 1900 | 1650 | 1500 | |||||
420 | 4 | 72 | IP20 | 2300 | 2150 | 2050 | 1950 | 1900 | 1900 | 1900 | 1800 | |
9/9 | 250 3V | 6 | 62 | IP20 | 2400 | 2300 | 1800 | 200 | ||||
420 | 4 | 72 | IP30 | 2700 | 2500 | 2300 | 1300 | |||||
10/8 | 250 | 6 | 62 | IP30 | 2500 | 2400 | 2100 | 1400 | ||||
560 | 4 | 74 | IP30 | 2900 | 2700 | 2600 | 2000 | |||||
10/10 | 250 | 6 | 65 | IP20 | 2600 | 2400 | 500 | |||||
560 | 4 | 70 | IP30 | 2900 | 2800 | |||||||
12/9 | 745 | 6 | 68 | IP20 | 4800 | 4300 | ||||||
1100T | 6 | 72 | IP30 | 6000 | 5700 | 5200 | 4800 | 4200 | 3300 | 400 | ||
12/12 | 736 3V | 6 | 68 | IP30 | 4700 | 3700 | 400 | |||||
1100T | 6 | 72 | IP30 | 6800 | 6400 | 5800 | 5200 | 4400 | 2000 |
all measurements are in mm
modello | A | B | C | D | E | F | G | H | I | L | M | N | O |
7/7 | 329 | 321 | 157 | 164 | 143 | 186 | 225 | 277 | 232 | 45 | 200 | 328 | 260 |
9/7 | 392 | 378 | 184 | 194 | 176 | 216 | 300 | 303 | 232 | 71 | 261 | 389 | 260 |
9/9 | 392 | 378 | 184 | 194 | 176 | 216 | 300 | 369 | 298 | 71 | 261 | 389 | 326 |
10/8 | 445 | 428 | 207 | 221 | 199 | 246 | 340 | 333 | 265 | 68 | 289 | 442 | 293 |
10/10 | 445 | 428 | 207 | 221 | 199 | 246 | 340 | 399 | 331 | 68 | 289 | 442 | 359 |
12/9 | 525 | 498 | 237 | 261 | 234 | 291 | 408 | 394 | 309 | 85 | 342 | 337 | 522 |
12/12 | 525 | 498 | 237 | 261 | 234 | 291 | 408 | 480 | 395 | 85 | 342 | 522 | 423 |
Model | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | ASOLA (mm) |
EVDA 7/7 | 255 | 225 | 94 | 28 | 15 | 16x12 |
EVDA 9/7-9/9 | 330 | 300 | 94 | 28 | 15 | 16x12 |
EVDA 10/8- 10/10 | 370 | 340 | 130 | 28 | 15 | 16x12 |
EVDA 12/9-12/12 | 438 | 408 | 130 | 28 | 15 | 16x12 |
modello | Velocità | Potenza Max ass. | Alimentazione | Codice motore | Regolatore di velocità | ventilatore EVDA |
|
W | euro | ||||||
7/7 | 1 | 50 | 230V-1F-50Hz | 713304-5 | RCS300 | 104,40 | 373,26 |
7/7 | 1 | 147 | 7133A15-5 | RCS300 | 104,40 | 434,11 | |
9/7 | 3 | 250 | 713314-5 | RCS600 | 129,60 | 636,97 | |
9/7 | 1 | 420 | 713316-5 | RCS900 | 154,80 | 596,40 | |
9/9 | 3 | 250 | 713335-5 | RCS600 (vel. max) | 129,60 | 653,20 | |
9/9 | 1 | 420 | 713332-5 | RCS900 | 154,80 | 576,11 | |
10/8 | 1 | 250 | 713354-5 | RCS600 | 129,60 | 632,91 | |
10/8 | 1 | 550 | 713355C-5 | RCS900 | 154,80 | 576,11 | |
10/10 | 1 | 250 | 713369-5 | RCS600 | 129,60 | 641,03 | |
10/10 | 1 | 550 | 713373C-5 | RCS900 | 154,80 | 584,23 | |
12/9 | 1 | 745 | 713390C-5 | RCS210 | 226,80 | 908,80 | |
12/9 | 1 | 1100 | 400V-3F-50Hz | 713394-5 | - | - | 973,71 |
12/12 | 3 | 736 | 230V-1F-50Hz | 7133G01CD-5 | RCS210 (vel. max) | 226,80 | 989,94 |
12/12 | 1 | 1100 | 400V-3F-50Hz | 713399-5 | - | - | 1010,23 |