EVHRC EC Highly efficient decentralized heat recovery unit for flow rates up to 1150 m³/h

Description

Ventilation unit with high flow rate heat recovery for decentralised applications specifically for ventilation in rooms requiring ventilation and air handling, such as schools, commercial environments, offices and small service sector applications. Possibility of installing an electric or water coil as an accessory. Constant flow rate selectable in 3 levels.

Characteristics

-Self-supporting sheet metal frame with polyethylene insulated internal structure.
-High efficiency counter-current cross-flow polypropylene heat exchanger. Low freezing temperatures. Very high heat exchange efficiency.
-Forward-curved Brushless centrifugal fans with electronic motor and modulating control; very high efficiency and low noise levels.
-ePM1 70% filters with low pressure drop for both supply and exhaust, easily removable in both horizontal and vertical configuration.
-Free cooling made inside the unit with large air passage and damper with motorised actuator.
-Electric or water coil.

Control electronics for version IN2

Electronic board for 3-step speed management, antifreeze function and automatic bypass. Wall-mounted remote touch panel on 503 box. Temperature sensors on board the machine.
Humidity / air quality regulators built into the remote display.
EVCNV2-N: advanced remote control with built-in humidity and VOC/CO₂ sensors, black.
EVCNV2-B: advanced remote control with built-in humidity and VOC/CO₂ sensors, white.
EVCNW2-N: advanced remote control with built-in humidity and VOC/CO₂ sensors and built-in Wi-Fi, black.
EVCNW2-B: advanced remote control with built-in humidity and VOC/CO₂ sensors and built-in Wi-Fi, white.

Use

Schools, commercial environments, offices and small service sector applications for air exchange with up to 90% reduction in energy waste.

Technical specifications

 
EVHRC EC size 60 120
Type of Fans Forward-curved centrifugal - Brushless direct-coupled electronic motor - 0/10 V signal
Number of Fans Nr. 2 supply + 1 exhaust 3 supply + 2 exhaust
Air flow rate V3/V2/V1 m³/h 620 / 355 / 165 1150 / 750 / 255
Useful pressure Pa 15 15
Heat exchanger (Data referring to the UNI EN 13141-7 Standard    Indoor temp. 20° - Indoor humidity 28% - Outside temp. 7° - Outside humidity 72%)
Type of heat exchanger Counter-current plates - polypropylene
Number of Heat exchangers Nr. 2 3
Heat recovery efficiency EN13141-7 % 86,1 84,9
Heat recovery efficiency EN305 % 91,8 90,4
Filters
Type of filters Pleated filters
Filtration class ePM1 70%
Acoustic data (Data referring to the UNI EN 3741 and UNI EN 3744 Standards)
Sound power Lw transmitted by the structure dB(A) 59 62
Sound pressure at 3 m V1 dB(A) 41 43
Sound pressure at 3 m V2 dB(A) 36 37
Sound pressure at 3 m V3 dB(A) 33 34
Electrical Data
Power supply V / ph / Hz 230 / 1 / 50
Current consumption A 3,5 4,8
Power consumption W 340 620
Power consumption at maximum speed with clean filters W 165 355
Max power consumption with heating element kW 1,34 2,12
Maximum current consumption with heating element A 7,8 11,3
Protection rating IP X0 X0

HORIZONTAL configuration dimensions

 
HORIZONTAL configuration dimensional data 60 H 120 H
Height A mm 405 405
Width B mm 1040 1440
Collars for connection to C piping mm 76 76
Depth D mm 905 905
Connection diameter mm 200 250
Condensate drain mm 20 20
Weight Kg 71 88

VERTICAL configuration dimensions

 
VERTICAL configuration dimensional data 60 V 120 V
Height A mm 905 905
Width B mm 1040 1440
Collars for connection to C piping mm 76 76
Depth D mm 405 405
Connection diameter mm 200 250
Condensate drain mm 20 20
Weight Kg 71 88

Installation

HORIZONTAL configuration: the unit can be installed close to the wall with the ducts pointing directly outwards or away from the wall with minimum ducting to reach the outside.

VERTICAL configuration: the unit can be installed close to the wall with minimum ducting to reach the outside.

Accessories

UV-C lamp

 
Electric coils
Model EVRES 1 EVRES 2
Compatible unit model EVHRC EC 60 H / V EVHRC EC 120 H / V
Nominal heat output kW 1 (0,5x2) 1,5 (0,5x3)
Power supply V / ph / Hz 230V / 1F / 50Hz

 
Water coils
Model EVBACN 1 EVBACN 2
Compatible unit model EVHRC EC 60 H / V EVHRC EC 120 H / V
Nominal heat output (1) kW 3,38 4,17
Nominal water flow rate (1) m3/h 0,3 0,37
Pressure drop on water side (1) KPa 1 5
Supply water temperature °C 50 50
Pressure drop on air side Pa 14 27
Water connections Ø 3/4” 3/4”

(1) Yields and technical data with nominal flow rates and temperatures:
- Water IN / OUT 50°C / 40°C - Air IN 20°C

IN2 VERSION price list:

In the VERTICAL versions, the EVCNW2 control is built into the machine case.

Item normally available from stock
model EVHRC EC remote electronic control EVCNV2-N black remote electronic control EVCNV2 -B white remote electronic control EVCNW2-N with Wi-Fi
connection
black
remote electronic control EVCNW2-B with Wi-Fi
connection
white
pair of filters
euro euro euro euro euro euro
60 H 5326,82 230,88 230,88 285,05 285,05 177,84
120 H 7427,21 259,92
60 V 5999,18 n/a n/a n/a n/a 177,84
120 V 8246,79 259,92

n/a – not available

Accessories price list

Germicidal lamps, heating elements and water coils must be ordered when purchasing the machine, as they are installed on the machine.

Description Euro
Germicidal UV-C lamp with power supply and fastening elements. Estimated lamp life 10,000 hours of operation 377,57
EVRES 1 Heating element 2x0.5KW (for EVHRC EC 60) 376,34
EVRES 2 Heating element 3x0.5KW (for EVHRC EC 120) 524,82
EVBACN 1 Water coil (for EVHRC EC 60) 739,87
EVBACN 2 Water coil (for EVHRC EC 120) 1223,73
External grille kit Ø 200 mm (for EVHRC EC 60) 172,37
External grille kit Ø 250 mm (for EVHRC EC 120) 187,42
Silencer 316,01

Spare parts price list

Description Euro
Spare UV-C lamp 251,71
Request for product information

EVHRC EC

data
Message