Air jets with horizontal aluminium fixed bars with 0° or 15° deflection.
Material: aluminium.
Finish: natural anodised.
Installation: clip fastening for EBL 20 and EBL 21 and fork clip fastening for EBL 22.
Max length achievable in one piece: 2000 mm.
Air jets used in air conditioning and ventilation systems for both supply and exhaust.
They can be installed on the ceiling, on the wall and on the floor in non-walkable areas.
They are also used as grilles in fan coils.
EBL20/0: with frame and front fixed bars with 0° deflection;
EBL20/15: with frame and front fixed bars with 15° deflection;
EBL21/0: with frame, front fixed bars with 0° deflection and adjustable rear blades;
EBL21/15: with frame, front fixed bars with 15° deflection and adjustable rear blades;
EBL22/0: without frame, only fixed bars with 0° deflection;
EBL22/15: without frame, only fixed bars with 15° deflection.
- EPZ galvanised plenum;
- EPI insulated plenum;
- SC galvanised steel regulation damper with blades with opposing movement;
- CT galvanised steel counter-frame to set into wall;
- fork clips for EBL 22
Painting in different RAL colours.
Holes on frame for installation with screws.
Removable finned pack (EBL 20 version only in special construction with 40mm deep frame).
Continuous EBL 20/0 and EBL 20/15 for lengths greater than 2000 mm with the possibility of also adding inspection doors.
On request, continuous EBL 20/0 or EBL20/15 inspection doors.
Vk: effective speed (m/s)
m³/h: flow rate
Pa: pressure drops in Pascal
L1 (m): air throw referring to a terminal velocity Vt= 0.25 m/s and with a temperature differential of 10/12°C, installed near the ceiling (not beyond 3 m); for greater distances, correct the air throw by multiplying it by 0.7
dB(A): noise level
All dimensions are expressed in mm.
dimension LxH |
effective cross-section |
Vk 3 m/s | Vk 4 m/s | Vk 5 m/s | |||
m2 | m³/h | L1 | m³/h | L1 | m³/h | L1 | |
400x75 | 0,015 | 160 | 2,8 | 213 | 3,8 | 266 | 4,7 |
500x75 | 0,019 | 201 | 3 | 268 | 3,9 | 335 | 4,9 |
600x75 | 0,022 | 243 | 3,1 | 323 | 4,1 | 404 | 5,1 |
800x75 | 0,030 | 326 | 3,3 | 434 | 4,3 | 543 | 5,4 |
1000x75 | 0,038 | 408 | 3,4 | 545 | 4,5 | 681 | 5,7 |
400x100 | 0,020 | 216 | 2,9 | 292 | 3,8 | 365 | 4,8 |
500x100 | 0,026 | 276 | 3 | 367 | 4 | 459 | 5 |
600x100 | 0,031 | 332 | 3,1 | 443 | 4,2 | 554 | 5,2 |
800x100 | 0,041 | 446 | 3,3 | 595 | 4,4 | 743 | 5,5 |
1000x100 | 0,052 | 560 | 3,5 | 746 | 4,6 | 933 | 5,8 |
400x125 | 0,026 | 278 | 2,9 | 370 | 3,9 | 463 | 4,9 |
500x125 | 0,032 | 350 | 3,1 | 467 | 4,1 | 583 | 5,1 |
600x125 | 0,039 | 422 | 3,2 | 563 | 4,2 | 703 | 5,3 |
800x125 | 0,052 | 566 | 3,4 | 755 | 4,5 | 944 | 5,6 |
1000x125 | 0,066 | 711 | 3,5 | 947 | 4,7 | 1184 | 5,9 |
400x150 | 0,031 | 337 | 3 | 449 | 4 | 561 | 5 |
500x150 | 0,039 | 424 | 3,1 | 566 | 4,2 | 707 | 5,2 |
600x150 | 0,047 | 512 | 3,3 | 682 | 4,3 | 853 | 5,4 |
800x150 | 0,064 | 687 | 3,4 | 916 | 4,6 | 1145 | 5,7 |
1000x150 | 0,080 | 862 | 3,6 | 1149 | 4,8 | 1436 | 6 |
400x200 | 0,042 | 455 | 3,1 | 607 | 4,2 | 758 | 5,2 |
500x200 | 0,053 | 573 | 3,3 | 764 | 4,4 | 955 | 5,4 |
600x200 | 0,064 | 691 | 3,4 | 922 | 4,5 | 1152 | 5,6 |
800x200 | 0,086 | 927 | 3,6 | 1237 | 4,8 | 1546 | 6 |
1000x200 | 0,108 | 1164 | 3,8 | 1552 | 5 | 1940 | 6,3 |
600x300 | 0,097 | 1050 | 3,6 | 1400 | 4,8 | 1750 | 6 |
800x300 | 0,130 | 1409 | 3,8 | 1879 | 5,1 | 2348 | 6,4 |
1000x300 | 0,164 | 1768 | 4 | 2357 | 5,3 | 1947 | 6,7 |
Pa | 5 | 10 | 15 | ||||
dB(A) | 25 / 32 | 33 / 39 | 38 / 44 |
Holes on request.
Holes on request.
Fork clips with plate for EBL 22/0° EBL 22/15°.
Model | Length | Number of vertical ducts |
Number of forks |
L | |||
EBL 22/0° EBL 22/15° | up to 502 mm | 2 | 4 |
from 503 mm to 901 mm | 3 | 6 | |
from 902 mm to 1277 mm | 4 | 8 | |
from 1278 mm to 1577 mm | 5 | 10 | |
from 1578 mm to 1877 mm | 6 | 12 | |
from 1878 mm to 2000 mm | 7 | 14 |
- Length L ≤ 2000 mm in one piece;
- Length L > 2000 mm ≤ 4000 mm: in two parts of length L/2;
- Length L > 4000 mm: in a number of central parts of length L = 2000 and two end parts of length Lx > 1000 mm < 2000 mm.
On request, inspection doors for continuous EBL 20-0 or 20-15.
Galvanised steel regulation damper with blades with opposing movement.
EBL 20 removable pack +20%.
Continuous EBL 20-0 EBL 20-15 prices on request.
model L1 x H1 |
top connection | lateral connection | E | F |
model L1 x H1 |
top connection | lateral connection | E | F | ||||||||
P1 | no. connections | Ø d | P2 | no. connections | Ø d | P1 | no. connections | Ø d | P2 | no. connections | Ø d | ||||||
400x75 | - | - | - | 150 | 2 | 98 | 80 | 12 | 1000x125 | 200 | 3 | 123 | 230 | 3 | 123 | 80 | 12 |
500x75 | - | - | - | 150 | 2 | 98 | 80 | 12 | 400x150 | 200 | 1 | 148 | 250 | 1 | 148 | 80 | 12 |
600x75 | - | - | - | 150 | 2 | 98 | 80 | 12 | 500x150 | 200 | 2 | 148 | 250 | 2 | 148 | 80 | 12 |
800x75 | - | - | - | 150 | 2 | 98 | 80 | 12 | 600x150 | 200 | 2 | 148 | 250 | 2 | 148 | 80 | 12 |
1000x75 | - | - | - | 150 | 2 | 98 | 80 | 12 | 800x150 | 200 | 2 | 148 | 250 | 2 | 148 | 80 | 12 |
400x100 | 200 | 2 | 98 | 200 | 2 | 98 | 80 | 12 | 1000x150 | 200 | 3 | 148 | 250 | 3 | 148 | 80 | 12 |
500x100 | 200 | 2 | 98 | 200 | 2 | 98 | 80 | 12 | 400x200 | 200 | 1 | 198 | 300 | 1 | 198 | 80 | 12 |
600x100 | 200 | 2 | 98 | 200 | 2 | 98 | 80 | 12 | 500x200 | 200 | 1 | 198 | 300 | 1 | 198 | 80 | 12 |
800x100 | 200 | 2 | 98 | 200 | 2 | 98 | 80 | 12 | 600x200 | 200 | 2 | 198 | 300 | 2 | 198 | 80 | 12 |
1000x100 | 200 | 3 | 98 | 200 | 3 | 98 | 80 | 12 | 800x200 | 200 | 2 | 198 | 300 | 2 | 198 | 80 | 12 |
400x125 | 200 | 1 | 123 | 230 | 1 | 123 | 80 | 12 | 1000x200 | 200 | 2 | 198 | 300 | 2 | 198 | 80 | 12 |
500x125 | 200 | 2 | 123 | 230 | 2 | 123 | 80 | 12 | 600x300 | 200 | 2 | 198 | 350 | 2 | 248 | 80 | 12 |
600x125 | 200 | 2 | 123 | 230 | 2 | 123 | 80 | 12 | 800x300 | 200 | 2 | 248 | 350 | 2 | 248 | 80 | 12 |
800x125 | 200 | 2 | 123 | 230 | 2 | 123 | 80 | 12 | 1000x300 | 200 | 2 | 248 | 350 | 2 | 248 | 80 | 12 |
EBL 20 removable pack +20%.
Continuous EBL 20-0 EBL 20-15 prices on request.
fork clips with plate EBL 22 | |
Model | euro |
fork clips | 2,79 |